Yaskawa Modbus TCP/IP Installation Manual do Utilizador descarregar pdf (Página 14)

5 Installation Procedure

14 YASKAWA ELECTRIC TOBP C730600 57B 1000-Series Option SI-EM3 Installation Manual

Do not use damaged wires, place excessive stress on wiring, or damage the wire

insulation.

Failure to comply could result in death or serious injury.

Fire Hazard

Tighten all terminal screws to the specified tightening torque.

Loose electrical connections could result in death or serious injury by fire due to

overheating of electrical connections.

NOTICE

Damage to Equipment

Observe proper electrostatic discharge (ESD) procedures when handling the option,

drive, and circuit boards.

Failure to comply may result in ESD damage to circuitry.

Never shut the power off while the drive is outputting voltage.

Failure to comply may cause the application to operate incorrectly or damage the drive.

Do not operate damaged equipment.

Failure to comply may cause further damage to the equipment.

Do not connect or operate any equipment with visible damage or missing parts.

Do not use unshielded cable for control wiring.

Failure to comply may cause electrical interference resulting in poor system performance.

Use shielded twisted-pair wires and ground the shield to the ground terminal of the drive.

W ARNING

Modbus_IM_E_conditional.fm 14 ページ２０１２年１０月３１日　水曜日　午後１時４５分

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 50 51

Sem comentários

Yaskawa Modbus TCP/IP Installation Manual do Utilizador Página 14