Yaskawa Modbus TCP/IP SI-EM3D Manual do Utilizador descarregar pdf (Página 18)

NS MS

Figure 4 Apply the LED Label

Make sure the screws on the left and right sides of the option terminal block (J) are

tightened with a tightening torque of 0.5 to 0.6 Nm (4.4 to 5.3 in lbs), then insert the

option (B) into the CN5-A connector (L) located on the drive and fasten it using one

of the included screws (H).

NS MS

TX RX

Figure 5 Insert the Option

5 Installation Procedure

YASKAWA TOEP YAICOM 18A 1000-Series Option Dual-Port Modbus TCP/IP SI-EM3D Installation Manual

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 51 52

Sem comentários

Yaskawa Modbus TCP/IP SI-EM3D Manual do Utilizador Página 18